TrafficMASTER InterLock 184368 Installation Guide

Browse online or download Installation Guide for Unknown TrafficMASTER InterLock 184368. TrafficMASTER InterLock 184368 Installation Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
INSTALLATION INSTRUCTIONS
General description:
TrafficMASTER
InterLock is a uniquely engineered luxury vinyl plank in a
6in x 36in format with a mechanically locking fastening system. (See 1)
No special
adhesives or
glues are
required. TrafficMASTER InterLock is installed as a “floating” floor so it
can be installed over a wide range of subfloors including wood, concrete,
existing vinyl and vinyl composition tiles, as well as existing ceramic tile.
Since no under pad is required, it may be necessary to “skim coat” over
deeply embossed existing resilient flooring and to smooth out ceramic
grout joints before installing TrafficMASTER InterLock. TrafficMASTER
InterLock must not be installed over carpet of any kind.
Estimating and layout:
TrafficMASTER InterLock is packaged 22.66 square feet per carton.
Determine the required amount of flooring by multiplying the length to
the width of the room. In most cases, it is advisable to add approximately
10% to this total to allow for overage due to cutting and fitting. Divide
this total square footage requirement by the number of square feet in a
carton to determine the number of cartons required.
Plan your layout so the long dimension of
the plank is oriented to the long dimension
of the room. Most times it is advisable to
have the long dimension of the plank
oriented parallel to the incoming light
from windows. (See 2) Work from several
cartons at a time to ensure a good balance
of color, shading and texture.
Job site conditions:
TrafficMASTER InterLock is to be installed in climate-controlled indoor
environments only. The job site temperature should be at least 65°F to
85°F for twenty four hours before, during and after the installation.
Minimum temperature should then be maintained at 55°F. TrafficMASTER
InterLock should be protected from direct exposure to sunlight. In new
construction or heavy renovation projects, TrafficMASTER InterLock
should only be installed after the other trades have completed their
work and the area is in a “clean and debris free” condition.
G
roove Side Tongue Side
2
1
1
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONSGeneral description:TrafficMASTER™InterLock is a uniquely engineered luxury vinyl plank in a 6in x 36in format with a mechani

Page 2

While TrafficMASTER™InterLock planks are not susceptible to damagefrom moisture, excessive subfloor moisture is an ideal breeding groundfor mold, mild

Page 3 - Expansion

Install the second plank in the secondrow by inserting the short end tongueinto the previously installed plank groove.Align the plank so the long side

Page 4

Protect all exposed edges by installing wall molding and/or transitionstrips. It is recommended to use proper transitions that are designed for floati

Page 5 - INSTRUCCIONES DE INSTALACIÓN

INSTRUCCIONES DE INSTALACIÓNDescripción general:TrafficMASTER™ InterLock es una tabla de lujo de 15,24cm x 91,44cm hecha devinilo, con un diseño exclu

Page 6 - 6 Español

Aunque las tablas TrafficMASTER™ InterLock no son susceptibles a los dañospor humedad, la humedad excesiva del contrapiso puede propiciar la aparición

Page 7 - Espacio de

Instala la primera tabla en la segunda fila insertando la lengüeta del lado largo en la ranura de la tabla en la primera fila. Insertar latabla en áng

Page 8 - 8 Español

Cuando se coloque alrededor de obstáculos o en espacios irregulares, TrafficMASTER™ InterLock se puede cortar limpia y fácilmente usando uncuchillo mu

Comments to this Manuals

No comments